From serial production to customer-specific solutions. Increase your profitability with the VP75 3D printer and operate your own additive manufacturing system.
ClogSense – Filament Monitoring
The ClogSense technology monitors your filament feed live during printing. If the filament transportation is compromised due a clogged nozzle, missing filament, or too low an extrusion temperature, the system will stop printing. This will help you detect errors and optimize your process.
VacuFlat – Quick-Release System
The VP75 comes with a vacuum quick release mechanism on the print table. This allows a variety of plates and foils to be used as a substrate. Print ABS, PC and many other materials on the continuous-use PEI sheet or use other materials on a special substrate, as the material requires, without coating or pretreatment. You also get minimal set-up time thanks to the quick-release system, which is particularly suitable for mass production.
ActuProbe – Print Table Calibration
The first layer determines the success and quality of the entire print. That’s why the system performs a fully automatic fine calibration at the beginning of each print. With this three-point measurement of the print bed, you can safely change the print substrate without manual configuration – regardless of materials and sheet thickness.
Materials
We recommend Polymaker Industrial Polycarbonate PC and PA filaments by default. You can also easily print many more materials with our machines. If you have a special material request, just contact us:
+49 431 98 35 24 73-0
Optional Accessories
Additional filament made of other materials and diameters
Different nozzle sizes for more flexibility
Print sheets for continuous operation
Starter kit – get productive right from the beginning
*when buying a machine
Technical Specifications
|
3D Printing Technology |
Fused Filament Fabrication (FFF) |
|
Resolution |
Minimal layer thickness approx. 0.05 mm depending on nozzle size, printing material etc. |
|
Filament |
Ø1.75 +/- 0.05 mm, |
|
Materials |
Engineering plastics such as Polymaker Industrial PC & PA filaments and Kühling&Kühling brand filament, others on request; Break-away support structures made of model material |
|
Print Head |
High performance print head (up to 500°C, up to 100 g/h), Ø0.50 mm nozzle pre-installed; |
|
Build Volume |
Ø400×600 mm (75 liters), actively heated print environment up to 80°C |
|
Print Table |
VacuFlat – Quick-Release System; 1 continuous-use PEI sheet pre-installed, heated print bed up to 150°C |
|
User Interface |
Integrated 10″ touch screen |
|
Fully Automatic Calibration |
ActuProbe – Print Table Calibration |
| Sensor Technology |
ClogSense – Filament Monitoring |
|
Software |
Slic3r pre-configured |
|
Data Transfer |
Ethernet 10/100, RJ45 |
|
Power Supply |
230 V AC 16 A, compressed air 6-8 bar 80 l/min |
|
Dimensions & Weight |
Approx. 80x74x220 cm (BxTxH), approx. 250 kg |
|
Service |
12 months warranty incl., extendable via service contracts |