Optimal processing of engineering plastics – for resilient functional components and prototypes. With the HT500.3 you can print technical plastics uncompromisingly under the optimum process conditions for dimensionally stable and maximum load-bearing components. Our open system also offers you maximum flexibility.

Dual Extruder
The HT500.3 offers more flexibility during the printing process with its two nozzles on the print head. With two different materials, the HT500.3 can print soluble support material for even higher surface quality. Or you can print with different nozzle diameters and the same material, so you can reduce the printing time depending on the component area. By default, the HT500.3 comes with stainless steel unibody nozzles. Both nozzles can be heated up to 500°C.
Open Source Technology
You would like to adapt hardware or software to special needs? Change every operating parameter you can imagine – speed, temperatures, resolution. The HT500.3 processes standard filaments in Ø1.75 mm. Choose from the wide variety of compatible materials.
Optional Accessories

Additional filament made of other materials and diameters

Other nozzle sizes for more flexibility

Build plates for continuous operation

Starter package, for your direct start in productivity
*when buying a machine
Technical Specifications
3D Printing Technology |
Fused Filament Fabrication (FFF) |
Resolution |
Minimal layer thickness approx. 0.05 mm depending on nozzle size, printing material etc. |
Filament |
Ø1.75 +/- 0.05 mm |
Model material |
ABS, PC, HIPS, PET(G), PVA, PLA, TPEs, igus Tribo filaments, PA6/66, PA12 and many other materials |
Support material |
Soluble support material available for ABS, PET(G), PLA, PLA-/PETG-based composites; Break-away support material available for all model materials |
Print Head |
Two high-temperature printheads (up to 500°C), stainless steel unibody nozzles, one nozzle tip Ø0.35 mm and Ø0.50 mm pre-installed; print head cleaning system for optimal multi material print results |
Print Table |
Interchangeable, maintenance-free high-performance permanent build plates, et al compatible with ABS, PC, PETG, HIPS, PVA, PLA, TPU and more without pre-treatment/coating/gluing, pre-installed with a continuous-use plate with PEI coating, heated print bed up to 130°C |
Build Volume |
200x180x290 mm (BxTxH, 10,44 Liter), actively heated print environment up to 70°C |
Cooling |
Watercooled stepper motors, print heads and LED lighting |
User Interface |
Integrated 10″ touch screen |
Automatic Calibration |
Via user interface |
Software |
Slic3r pre-configured |
Data Transfer |
Ethernet 10/100, RJ45 |
Power supply |
100-240 V AC, 50-60 Hz, 1000 W max. |
Dimensions and Weight |
Approx. 60x80x80 cm (BxTxH), approx. 49 kg |
Service |
12 month warranty incl., extendable with service contracts |